Broke? Fix it first.
Your washer, fridge, or dryer just quit — and a salesperson is already circling. Before you spend thousands on a new one, get the honest math: what a fair repair costs, what a replacement costs, and which one actually makes sense.
Repair-or-replace calculator
Pick your appliance, its age, and what's wrong. The verdict updates as you go — no email, no sign-up.
Honest disclosure: Fix It First is a free calculator, not a repair company. The two buttons above are plain links to Angi and RepairClinic — affiliate partnerships are being set up (Angi's program pays $7–25 per qualified lead; RepairClinic pays 6% per parts sale), and this disclosure will be updated the moment commissions apply. Prices shown are 2026 US averages from public sources (HomeGuide / HomeAdvisor) and vary by brand, model, and city.
How much does refrigerator repair cost in Chicago?
The refrigerator is the appliance Chicago households ask about most — it runs 24/7, and when it stops cooling, the food clock starts ticking. Here's what a fair repair actually costs, based on 2026 HomeGuide / HomeAdvisor price data.
| Where your quote lands | Price | What it usually means |
|---|---|---|
| Lower end | $125 | Simple fixes: thermostat, door seal, fan motor, a clogged defrost drain |
| Typical range | $125 – $500 | Most fridge repairs fall in this band, parts and labor included |
| Upper end | $500+ | Compressor or sealed-system work — run the 50% rule before you approve it |
A refrigerator's expected lifespan is about 13 years (NAHB life-expectancy study). A $300 repair on a 6-year-old fridge is almost always money well spent; the same repair on a 14-year-old fridge usually isn't.
Not cooling evenly
Most often a failed evaporator fan or a thermostat that's drifted. Cheap parts, about an hour of labor — one of the best-value repairs there is.
Leaking water
Usually a frozen or clogged defrost drain line, or a cracked drain pan. Annoying puddle, inexpensive fix — and worth doing before it warps a floor.
Compressor failing
Loud clicking, constant running, or warm air everywhere. This is the one fridge repair that often fails the 50% rule — get the quote, then check the calculator above.
Safe to try yourself first
- Vacuum the condenser coils (dust is the #1 cause of "running hot")
- Check the temperature settings — 37°F fridge, 0°F freezer
- Replace a worn door gasket so cold air stops escaping
- Clear a frozen defrost drain with warm water
Call a pro when…
- The compressor, refrigerant, or sealed system is involved
- You smell burning or see scorched wiring
- The fridge is warm and the food is already at risk
- It's still under warranty — DIY can void it
How much does washing machine repair cost in Chicago?
A dead washer backs up fast in a Chicago household — especially in winter, when a trip to the laundromat is no fun. Most washer breakdowns are mechanical, not catastrophic, which is why repair so often wins. Here's what a fair repair costs, based on 2026 HomeGuide / HomeAdvisor price data.
| Where your quote lands | Price | What it usually means |
|---|---|---|
| Lower end | $100 | Simple fixes: clogged drain pump filter, inlet hoses, lid switch, drive belt |
| Typical range | $100 – $400 | Most washer repairs fall in this band, parts and labor included |
| Upper end | $400+ | Motor, transmission, or control board work — run the 50% rule before you approve it |
A washing machine's expected lifespan is about 11 years (NAHB life-expectancy study). A $200 repair on a 5-year-old washer is usually well worth it; the same repair on an 11-year-old machine that already bangs on the spin cycle usually isn't.
Won't drain
Most often a clogged or failed drain pump, or a kinked drain hose. One of the most common — and most fixable — washer calls in Chicago.
Won't spin or agitate
Usually a worn drive belt, motor coupling, or lid switch on top-loaders, and a motor or door-lock issue on front-loaders. Worth fixing on a mid-life machine.
Leaking
Typically split inlet hoses, a worn door boot seal on front-loaders, or a tub seal starting to go. Catch it early — water damage costs far more than the repair.
Safe to try yourself first
- Clean the drain pump filter (check your manual — often behind a small front panel)
- Check inlet and drain hoses for kinks, cracks, and loose connections
- Level the machine and redistribute a lopsided load if it bangs or walks
- Run an empty hot cycle to clear detergent and mildew buildup
Call a pro when…
- The motor, transmission, or main control board is involved
- You smell burning or the breaker keeps tripping
- Water is leaking from underneath, not from a hose you can see
- It's still under warranty — DIY can void it
How much does dryer repair cost in Chicago?
Dryers are the simplest major appliance in the house — a drum, a motor, and a heat source — so they are also among the cheapest to repair. In Chicago, where winter laundry can't just hang outside, a quick fix usually beats a replacement. Here's what a fair repair costs, based on 2026 HomeGuide / HomeAdvisor price data.
| Where your quote lands | Price | What it usually means |
|---|---|---|
| Lower end | $100 | Simple fixes: thermal fuse, drive belt, drum rollers, clogged vent line |
| Typical range | $100 – $300 | Most dryer repairs fall in this band, parts and labor included |
| Upper end | $300+ | Motor or control board work — run the 50% rule before you approve it |
A dryer's expected lifespan is about 12 years (NAHB life-expectancy study). Because new dryers start around $1,050 installed, even a $250 repair on an 8-year-old dryer is often the right call — as long as the drum and motor are sound.
Runs but no heat
Most often a burned-out heating element on electric models or a failed igniter on gas models, plus a blown thermal fuse. Classic, inexpensive, same-day fix.
Drum won't tumble
Almost always a snapped drive belt, worn drum rollers, or a seized idler pulley. Cheap parts — the labor is most of the bill.
Takes forever to dry
Usually a lint-clogged vent run — very common in older Chicago homes with long vent paths — or a failing moisture sensor. Also a fire-risk fix: don't put it off.
Safe to try yourself first
- Clean the lint screen and wash it with soap if dryer sheets have filmed it over
- Vacuum out the vent hose and check the outside vent flap opens freely
- Check the breaker — electric dryers often trip only one leg and tumble without heat
- Don't overload: a packed drum dries slowly and strains the belt
Call a pro when…
- It's a gas dryer and the igniter, valve, or gas line is involved — never DIY gas
- You smell burning, see scorch marks, or the drum has stopped with a hum
- The motor or control board needs replacing
- It's still under warranty — DIY can void it
How much does dishwasher repair cost in Chicago?
Dishwashers live the shortest life of any major appliance, so age matters more here than anywhere else. A young dishwasher is almost always worth repairing; an old one with a motor problem often isn't. Here's what a fair repair costs, based on 2026 HomeGuide / HomeAdvisor price data.
| Where your quote lands | Price | What it usually means |
|---|---|---|
| Lower end | $150 | Simple fixes: clogged filter or spray arms, door latch, inlet valve screen |
| Typical range | $150 – $400 | Most dishwasher repairs fall in this band, parts and labor included |
| Upper end | $400+ | Wash motor or control board work — on a 9-year-old unit, replacement usually wins |
A dishwasher's expected lifespan is about 9 years (NAHB life-expectancy study) — the shortest of the five appliances here. Chicago's hard water shortens that further if you never descale. A $200 repair on a 4-year-old dishwasher makes sense; the same money on a 9-year-old one rarely does.
Not draining
Most often a clogged filter, a blocked drain hose, or a failing drain pump. Standing water in the tub is the tell — and the fix is usually straightforward.
Dishes come out dirty
Typically clogged spray arms from Chicago hard-water scale, a weak wash pump, or a water inlet valve that isn't filling properly. Cleaning fixes more of these than parts do.
Leaking onto the floor
Usually a worn door gasket, a cracked hose, or a loose pump seal. Fix it promptly — a slow dishwasher leak is a classic cause of ruined kitchen floors and cabinets.
Safe to try yourself first
- Remove and rinse the bottom filter — the #1 cause of draining and odor problems
- Clear clogged spray-arm holes with a toothpick and descale for hard water
- Check the drain hose loop under the sink hasn't dropped or kinked
- Run a hot empty cycle with a dishwasher cleaner to clear grease buildup
Call a pro when…
- The wash motor, circulation pump, or control board is involved
- Water is leaking from underneath or behind the unit
- There's any electrical fault, burning smell, or tripped breaker
- It's still under warranty — DIY can void it
How much does oven and range repair cost in Chicago?
Ovens and ranges last longer than any other appliance in the kitchen, so repair is very often the smart money — a new range is a big ticket, and most heating faults trace back to one replaceable part. Here's what a fair repair costs, based on 2026 HomeGuide / HomeAdvisor price data.
| Where your quote lands | Price | What it usually means |
|---|---|---|
| Lower end | $150 | Simple fixes: door gasket, temperature sensor, burner cap or grate issues |
| Typical range | $150 – $400 | Most oven and range repairs fall in this band, parts and labor included |
| Upper end | $400+ | Control board or multiple-element work — run the 50% rule before you approve it |
An oven / range's expected lifespan is about 15 years (NAHB life-expectancy study) — the longest of the five appliances here. A $300 repair on a 7-year-old range is almost always worth it; even at 12 years, a single igniter or element can buy you several more good years.
Oven won't heat
On gas ranges, a worn igniter is the cause nine times out of ten; on electric, it's a burned-out bake element. The single most common oven repair — and one of the best value.
Burner won't light / ignite
Usually a clogged burner port, a failed spark igniter, or a weak oven igniter drawing too little current to open the gas valve. Quick diagnosis, modest parts cost.
Cooks unevenly
Typically a drifting temperature sensor, a failing convection fan, or an element that's heating on only part of its length. An oven thermometer confirms it before you spend anything.
Safe to try yourself first
- Verify the real temperature with a cheap oven thermometer before booking a repair
- Clean clogged gas burner ports with a pin and reseat the burner caps
- Replace a worn door gasket so heat stops escaping
- On electric models, visually check the bake element for blisters or breaks (power off first)
Call a pro when…
- Any gas valve, gas line, or igniter work is needed — never DIY gas connections
- You smell gas at any point — leave, then call your gas utility and a pro
- The control board, wiring, or self-clean latch is involved
- It's still under warranty — DIY can void it
The 50% rule, explained
Repair it if the repair costs less than 50% of a new unit and the appliance is less than halfway through its expected life. That's the rule of thumb Consumer Reports uses, and it's what powers the calculator above.
Replace it when a repair crosses that 50% line on an older machine — you'll likely pay for the next breakdown too, and a new unit comes with a warranty and lower energy bills.
In between is the honest grey zone: a borderline repair can still be the greener, cheaper call if the machine is otherwise solid. Every repair keeps a 100+ lb appliance in service and out of the landfill — the CO2 and waste figures in the calculator are estimates based on the appliance's weight and the footprint of manufacturing a new one.